Hot on the heels of the new 5 Series Saloon, the new BMW 5 Series Touring marks its world premiere at the Geneva Motor Show in March. Four engines will be available from launch in June, while the BMW xDrive intelligent all-wheel-drive system will be fitted in two models. Additional rear-wheel drive and all-wheel drive models will join the line-up later.
The new 5 Series Touring is 36mm longer than the outgoing model (at 4,943mm), eight millimetres wider (1,868mm) and 10mm taller (1,498mm). The wheelbase has been extended by seven millimetres to 2,975mm.
It will be powered by new-generation EfficientDynamics engines, equipped with BMW TwinPower Turbo technology. The 2.0-litre four-cylinder petrol in the 530i Touring delivers 252hp (up 7hp on its predecessor), peak torque of 350Nm at just 1,450rpm, and a zero to 100km/h time of 6.5 seconds. Combined fuel consumption of 46.3mpg and CO2 emissions of 139g/km are an improvement of almost ten per cent over the outgoing model.
The 3.0-litre six-cylinder in-line petrol engine powering the BMW 540i xDrive develops 340hp, up 34hp on its predecessor. Peak torque, which has increased by 50Nm to 450Nm and it completes the zero to 100km/h sprint in just 5.1 seconds.
Again, fuel consumption and CO2 emissions are almost ten per cent better than on the outgoing model, at 37.6mpg and 172g/km.
The petrol engines of the BMW 530i Touring and BMW 540i xDrive Touring come with twin-scroll turbochargers, High Precision Injection direct petrol injection, VALVETRONIC variable valve timing and double-VANOS variable camshaft timing, while new engine encapsulation technology reduces noise and speeds warm-up.
The diesel engines are fitted with a BMW TwinPower Turbo package comprising variable-geometry turbocharging and common-rail direct injection.
On the four-cylinder BMW 520d, solenoid injectors operating at up to 2,000 bar ensure precise fuel metering and clean combustion, as do the piezo injectors operating at up to 2,500 bar in the six-cylinder in-line engine powering the new 530d and 530d xDrive.
Both units feature BMW BluePerformance technology for reduced emissions. As well as a particulate filter, an oxidation catalyst and a NOX storage catalyst, this package also includes an SCR catalyst with AdBlue injection for additional NOx reductions.
The 2.0-litre diesel unit in the 520d Touring develops 190hp, and 400Nm of torque between 1,750 to 2,500rpm.
It does zero to 100km/h in 7.8 seconds, and has combined fuel consumption of 65.6mpg and CO2 emissions of 114g/km. The launch line-up is topped off by a 3.0-litre straight-six diesel developing 265hp and 620Nm of torque.
This engine can be combined with either rear-wheel drive or all-wheel drive.
The zero to 100km/h times are 5.8 seconds for the former and 5.6 seconds for the latter. Combined fuel consumption is 56.4mpg for the rear-wheel drive model and 51.3mpg for the all-wheel drive version, with CO2 emissions of 131g/km and 144g/km respectively - an improvement of up to 11 per cent in fuel consumption and emissions over the previous generation.
The eight-speed automatic gearbox is fitted as standard on all models.
It also offers more luggage space, 570 litres with the seats up (an increase of 10-litres and more than you get in a Volvo V90) and a maximum of 1,700-litres, 30-litres more than in its predecessor.
The increase in the luggage compartment’s width is particularly noticeable. Standard specification includes operation with an independently opening tailgate window.
This combines with the optional Comfort Access feature to allow hands-free opening and closing of the tailgate with a carefully aimed flick of the foot under the rear apron.
All models feature innovative storage solutions such as 40:20:40 near flat-folding rear seat backrests, which can be released remotely from the boot at the push of a button as well as load-dividing nets and a practical underfloor storage area in the boot.
The BMW 5 Series Touring is available to order priced from €56,590.
Copyright © 2011-2017 Galway Independent