How to Prevent an AC Repair for Your Central Air System Before the Summer
Having a central air unit can be challenging, because you don’t often use it during the winter. What you don’t know is that there are steps you should take and check in order to make sure that your central air unit is not only working properly, but also so it doesn’t malfunction. Not doing so could result in you having to pay for costly repairs to your AC unit, or worse – your home ventilation from a company like Reliablestandard.com. This guide will give you some things that can help you prevent an air conditioner repair for your central air system before the summer even hits.
Need To Know: Elements of a Central Air Conditioning System
There are a few terms that will help you when it comes to knowing about your central air unit throughout your house.
Air conditioning is when you have full control of the climate inside your home, as well as being able to remove water that’s created by condensation.
A compressor is a part of your AC unit which uses refrigerant (often Freon) in order to to pump the coolant through and cool the unit itself, as well as the air around it.
An evaporator is where the coolant is converted into a gas as it goes through the tubes and absorbs the surrounding heat.
A filter simply does what it says; it filters out foreign objects- much like the inside furnace/vent filter – from the coolant. Usually there is a filter inside the tubing to ensure that nothing can block the tubes from dispersing the coolant in all of its forms (sometimes there’s even more than one filter)
When Starting Your System
You want to make sure you inspect every element, from the AC unit outside, all the way to the wiring. At the same time, you also want to think about how old your AC unit is, because they don’t last forever even when you want them to.
After you’ve properly inspected everything on your AC unit, make sure you set your thermostat at whatever temperature you want to, and then if it has options, choose “auto” or hold. Many times, hold is the best option because the sensor will constantly check the thermostat. When you’re saving power you can always put it on “temporary” or set a schedule if you have a programmable thermostat.
Go outside, and make sure everything sounds and is working normal. You should feel hot air coming out of the top of your AC unit fan. Let it run for a while, because it usually takes some time to feel the results of the AC unit pulling the hot air from your home.
Why Do All of This Extra Work? Why Can’t I Just Turn It On?
One of the worst things that can happen in the summer is for you to turn on or down your AC and have no connection. Usually when your AC unit isn’t being used for approximately 6 months out of the year, you will end up needing to do maintenance on your air conditioner. Another special note: If you want during the winter (not when there is a ton of snow covering your AC unit, but cold is fine), simply start up your AC for a little while.
Of course you don’t want to make sure your house is too cold, but choose a time when your house heats up the most (doing laundry, cooking, etc.) and then run the AC for about 30 minutes to an hour to ensure that you keep everything in working order and not running idle. Take precautions to not let it run too long, or you could have a freeze-up which could also affect your heater.